6211 NSK Open Deep Groove Ball Bearing 55mm inside x 100mm outside x 21mm wide Shields Inside length 1779mm

Inside length 1779mm

Speed ratios up to 1:12 are possible

Breakaway torque on M10 bolts of 25Nm

Pitch Length 1662mm

Dynamic:35

6211 NSK Open Deep Groove Ball Bearing 55mm inside x 100mm outside x 21mm wide Shields Inside length 1779mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass