Ultra Racing - 4pt Rear Lower Brace - MITSUBISHI EVOLUTION X (CZ4A) 2008-2017 - UR-RL4-1423 3-Series-E46 Fender braces will generally bolt

Fender braces will generally bolt into the door jam but will require some modification and the section bolted under the fender to the front of the door will generally require to be bolted or welded to the inner fender

The Front Lower Bar also keeps the camber accurate during hard cornering

The torsion bar will help keep your vehicle flat in turns instead of leaning over to one side by distributing energy from the side of the car with all the force from the turn to the other side

Ultra Racing braces are made to ensure the chassis is reinforced and strengthened in a properly balance way that it won't cause the vehicle body to undergo too much stress

Torsion bars tie the lower suspension components together across the rear

Ultra Racing - 4pt Rear Lower Brace - MITSUBISHI EVOLUTION X (CZ4A) 2008-2017 - UR-RL4-1423 3-Series-E46 Fender braces will generally boltThe Ultra Racing Rear Lower Bar is designed to reduce the flex of the vehicle chassis where it is connected by the lower wishbone of the suspension system. Doing this will lessen the distortion of the vehicle lower suspension when it is under load, especially during hard cornering. They are installed at the lower mounting points between the left and right suspension and the vehicle chassis, improving the stiffness at the area where the lower arm is