6309C3 NSK Open Deep Groove Ball Bearing 45mm inside x 100mm outside x 25mm wide Shields Together with the extractors of

Together with the extractors of series 18 for extracting ball bearings

Pitch length 1360mm

Datum/Pitch Length 2520mm

d1 (inch) 2

C0 - Static load 214 kN

6309C3 NSK Open Deep Groove Ball Bearing 45mm inside x 100mm outside x 25mm wide Shields Together with the extractors ofNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass