6207NRC3 NSK Open Deep Groove Ball Bearing with Snap Ring Groove. 35mm inside x 72mm outside x 17mm wide Open Deep raceway grooves and the

Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions

Shaft da: 25mm

PIX 5L1320 manufacture a dedicated range of belts specifically designed to withstand the rigours of Grass Machinery applications

670 1/min

Outside length: 4252mm

6207NRC3 NSK Open Deep Groove Ball Bearing with Snap Ring Groove. 35mm inside x 72mm outside x 17mm wide Open Deep raceway grooves and theNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass