FRB5/150 SKF Locating Ring Closed where high radial load capacity

where high radial load capacity and efficient performance are critical

55-3-M_Splitting chisel

Outside length: 2407mm

2 mm Shoulder diameter of inner ring (largeside face)

Dynamic C: 176kN

FRB5/150 SKF Locating Ring Closed where high radial load capacityA bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.