6010 NSK Open Deep Groove Ball Bearing 50mm inside x 80mm outside x 16mm wide Sealed Outside length: 500mm

Outside length: 500mm

brass and stainless steel

Static:112 kn

Minimum Load Factor: 0

and long-lasting performance

6010 NSK Open Deep Groove Ball Bearing 50mm inside x 80mm outside x 16mm wide Sealed Outside length: 500mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass