Brown Patina CB Aluminium Dipping Patinas bright and shiny with minimum

bright and shiny with minimum metal loss

Sanding the Steel is Highly recommended prior to using the cleaner solution to ensure full coverage of the patina

When part is completely dry and the rusting is complete

Use Fine Steel Wool to Highlight and Buff the surface if a lighter Gun Metal finish is desired

Steel Etch imparts an aggressive Rust Finish upon Brushing or Dipping

Brown Patina CB Aluminium Dipping Patinas bright and shiny with minimumBrown Patina CB imparts a light brown Finish upon Brushing or Dipping. Brass and Copper Parts should be thoroughly cleaned and prepped prior to usage. Directions: Prepare Surface by brushing SURCLEAN 400 or Brush N Clean to degrease and descale. Rinse with Water. Ensure no cleaning solution remains on surface. Brush Brown Patina CB on Surface until Surface is entirely covered. Pay attention to edges and hard to reach areas. Let Part sit for 30 Seconds